MC95 Rugged Android Mobile Computer

Mobile Computer · 2 Configurations · Android 12

An Android Handheld Built for Full-Shift Field Work

A 5.5" 1440 x 720 display, a 5000mAh removable battery, and a body rated for 1.5 m / 4.9 ft. drops to the concrete.

An octa-core 2.0GHz processor with 4GB of RAM and 64GB of storage runs Android 12 with GMS, so line-of-business applications and a data-capture workflow run on one device. The two builds share that platform: one handles voice, forms, photos, and NFC card taps, and the other adds a Zebra 2D imager for barcode-driven work. Both are sealed to IP68 per IEC sealing specifications and rated for multiple 1.5 m / 4.9 ft. drops to the concrete across the operating temperature range. The imager is a Zebra SE4710 or CM60, chosen at order time. Dual-band 802.11 a/b/g/n/ac, Bluetooth 5.0, Vo-LTE, and GNSS keep the fleet on tooling your IT team already supports.

CedaGlo MC95 front view with the 5.5 inch touch panel lit

CedaGlo MC95 rear view showing the battery door, NFC read area and rear camera

CedaGlo MC95 left and right side profiles showing a scan key on each edge

CedaGlo MC95 top face with the scan window and bottom face with the covered USB Type-C port

CedaGlo MC95 seen at an angle from the side edge

Close view of the CedaGlo MC95 volume keys and side scan key

CedaGlo MC95 upper end showing the 2D imager window and rear camera

Android 12GMS included
Zebra 2D imagerSE4710 or CM60
802.11 a/b/g/n/ac2.4G/5G dual-band, 5G PA
Bluetooth 5.0Headsets, printers, cradles
Vo-LTEVoice carried over LTE
FDD-LTE and TDD-LTEBands listed in full below
GNSSGPS, GLONASS, BeiDou
NFC 13.56 MHz2-4 cm read range
ISO14443A/BContactless card protocol
USB Type-CUSB 2.0 with OTG
Micro SD (TF) cardUp to 256GB
JavaEclipse or Android Studio

Overview

The MC95 is a rugged Android handheld for staff who spend the whole shift away from a desk. An octa-core 2.0GHz processor, 4GB of RAM, and 64GB of storage carry Android 12 with GMS, and the 5.5" 1440 x 720 multi-touch panel answers to gloves and wet hands. The 5000mAh main battery is removable and supports quick charge, so a spare goes in on the floor instead of at a bench.

One part separates the two builds: the Zebra 2D imager. Order it and the imager reads the 1D and 2D symbologies listed further down, from Code128 and Interleaved 2 of 5 through PDF417, Datamatrix, and QR code. Leave it out and the same housing still carries NFC at 13.56 MHz, a 13MP autofocus rear camera with flash, and a 5MP front camera. The body, the battery, the radios, and the operating system are identical either way, so one deployment covers a mixed fleet.

The imager is a Zebra SE4710 or CM60. Wireless covers IEEE802.11 a/b/g/n/ac on 2.4G and 5G with a 5G PA, Bluetooth 5.0, Vo-LTE, and GNSS across GPS/AGPS, GLONASS, BeiDou, and Galileo. Developers write in Java, in Eclipse or Android Studio, against the CedaGlo Software Development Kit. Explore the full range of rugged mobile computers.

Key Features

Platform and Display

Octa-core, 2.0GHz
4GB RAM + 64GB ROM
Android 12 with GMS
5.5" 1440 x 720 panel
802.11 a/b/g/n/ac, 2.4G/5G

Sealed Body and Endurance

5000mAh removable battery
IP68 sealing per IEC
1.5 m / 4.9 ft. drops to concrete
±15 KV air discharge ESD
Operating -20 °C to 50 °C

Data Capture Options

Zebra SE4710 or CM60 imager
1D and 2D symbologies
NFC 13.56 MHz, 2-4 cm
13MP autofocus rear camera
5MP front camera

Features & Functions at a Glance

Features

Octa-core 2.0GHz4GB RAM + 64GB ROM

5.5" display1440 x 720

Multi-touch panelGloves and wet hands

5000mAh batteryRemovable, quick charge

IP68 sealingPer IEC specifications

1.5 m / 4.9 ft. dropsTo the concrete

SensorsLight, proximity, gravity

NotificationSound, LED, vibrator

Functions

2D barcode scanningZebra SE4710 or CM60

NFC13.56 MHz, 2-4 cm

Cameras13MP rear, 5MP front

Wi-Fia/b/g/n/ac, 2.4G/5G

Bluetooth 5.0Headsets and printers

GNSSGPS, GLONASS, BeiDou

Noise cancellationOne of two microphones

TF card expansionUp to 256GB Micro SD

Choose Your Configuration

CedaGlo MC95 without the 2D imager, front view

MC95, no imager

CedaGlo MC95 with the 2D imager window on the top face

MC95, with 2D imager

Feature	MC95, no imager	MC95, with 2D imager
Best for	Voice, forms, photo capture, and NFC card taps through a full shift	Barcode-driven picking, receiving, and stock counts through a full shift
Shared hardware	Identical in both configurations
Dimensions	160.0 x 75.0 x 16.4mm / 6.30 x 2.95 x 0.65in.
Weight	288g / 10.16 oz (device with battery)
Display	5.5'' , 1440 x 720
Power	5000mAh removable main battery, support quick charge
Sealing	IP68 per IEC sealing specifications
Drop	Multiple 1.5 m / 4.9 ft. drops to the concrete across the operating temperature range
NFC	13.56 MHz, 2-4 cm
Cameras	5MP front; 13MP Autofocus with flash rear
Configuration differences	The two rows below are the only ones that differ
2D Scanner	—	Zebra: SE4710; CM60
Symbologies	—	1D and 2D, listed in full under Specifications
Platform	Common to both configurations
Operating System	Android 12; GMS
CPU	Octa-core, 2.0GHz
RAM+ROM	4GB + 64GB
WLAN	IEEE802.11 a/b/g/n/ac, 2.4G/5G dual-band, 5G PA
Bluetooth	Bluetooth 5.0
GNSS	GPS/AGPS, GLONASS, BeiDou, Galileo

Accessory compatibility — The adaptor, USB cable, and charging cradle listed under Optional Accessories fit both configurations. For detailed specification, please check Accessory Guide.

Every value in this table matches the full Specifications section below.

A Closer Look at the Hardware

CedaGlo MC95 rear face showing the latched battery door, NFC read area and rear camera

Battery door with two latchesThe removable main battery sits behind a door held by two latches, so a spare goes in without tools. The NFC read area and the rear camera with its flash sit above the door, and a speaker port runs along the lower edge.

Close view of the CedaGlo MC95 side edge with volume keys and a scan key

A scan key on each side edgeThe keypad carries a power key, two scan keys, and volume (+/-) keys. One scan key sits on each side edge beside the volume keys, so left- and right-handed users reach the trigger the same way.

CedaGlo MC95 top face with scan window and bottom face with covered USB Type-C port

Scan window up top, port belowThe scan window and the rear camera share the top face, pointing away from the operator. On the bottom face a hinged cover protects the USB Type-C port, with a metal contact to either side of it.

Specifications

Physical Characteristics

Dimensions: 160.0 x 75.0 x 16.4mm / 6.30 x 2.95 x 0.65in.
Weight: 288g / 10.16 oz (device with battery)
Display: 5.5'' , 1440 x 720
Touch Panel: Multi-touch panel, gloves and wet hands supported
Power: 5000mAh removable main battery, support quick charge
Notification: Sound, LED indicator, vibrator
Expansion Slot: 1 slot for SIM card, 1 slot for SIM or TF card
Interfaces: USB Type-C, USB 2.0, OTG
Audio: 2 microphones, 1 for noise cancellation; 2 speakers; receiver
Keypad: Power key, 2 scan keys, volume (+/-) keys
Sensors: Light sensor, proximity sensor, gravity sensor

Communication

WLAN: IEEE802.11 a/b/g/n/ac, 2.4G/5G dual-band, 5G PA
WWAN: 2G: GSM (B2 / B3 / B5 / B8)
3G: WCDMA (B1 / B2 / B4 / B5 / B8)
      TD-SCDMA (B34 / B39)
4G: FDD-LTE (B1 / B2 / B3 / B4 / B5 / B7 / B8 / B12 / B17 /
      B20 / B28A / B28B)
      TDD-LTE (B38 / B39 / B40 / B41)
Bluetooth: Bluetooth 5.0
Vo-LTE: Support
GNSS: GPS/AGPS, GLONASS, BeiDou, Galileo

Developing Environment

Operating System: Android 12; GMS
SDK: CedaGlo Software Development Kit
Language: Java
Tool: Eclipse / Android Studio

Performance

CPU: Octa-core, 2.0GHz
RAM+ROM: 4GB + 64GB
Expansion: Supports up to 256GB Micro SD (TF) card

User Environment

Operating Temp.: -4 °F to 122 °F / -20 °C to 50 °C
Storage Temp.: -40 °F to 158 °F / -40 °C to 70 °C
Humidity: 5% RH - 95% RH non condensing
Drop Specification: Multiple 1.5 m / 4.9 ft. drops to the concrete across the operating temperature range
Tumble Specification: 1000 x 0.5 m / 1.64 ft. falls at room temperature
Sealing: IP68 per IEC sealing specifications
ESD: ±15 KV air discharge, ±8 KV conductive discharge

Barcode Scanning

2D Scanner: Zebra: SE4710; CM60
1D Symbologies: UPC/EAN, Code128, Code39, Code93, Code11, Interleaved 2 of 5, Discrete 2 of 5, Chinese 2 of 5, Codabar, MSI, RSS, etc.
2D Symbologies: PDF417, MicroPDF417, Composite, RSS, TLC-39, Datamatrix, QR code, Micro QR code, Aztec, MaxiCode; Postal Codes: US PostNet, US Planet, UK Postal, Australian Postal, Japan Postal, Dutch Postal (KIX), etc.

*This function is optional

Camera

Front Camera: 5MP
Rear Camera: 13MP Autofocus with flash

NFC

Frequency: 13.56 MHz
Protocol: ISO14443A/B, ISO15693, NFC-IP1, NFC-IP2, etc.
Chips: M1 card (S50, S70), CPU card, NFC tags, etc.
Range: 2-4 cm

Optional Accessories

Accessories: Adaptor, USB Cable, Charging Cradle, etc.

* For detailed specification, please check Accessory Guide.

Every row above is transcribed from the MC95 configuration sheet. Items not listed there are not offered on this page.

Why Buy the MC95 From CedaGlo

Components You Can Verify

We name the parts. The imager is a Zebra module, the operating system is Android 12 with GMS, and both appear by name in the specifications above. Look them up on the vendor sites before you decide, not after the units land.

Configured Before It Ships

You pick the build when you order, not off a shelf. The imager option, the memory image, and the network settings are set before the units leave us, so the first handheld your team opens is already the one you asked for.

Try It Before You Commit

Ask for an evaluation unit and run it through a real working day. Scan your own labels, cover your own aisles, and check your own access points. We would rather find a mismatch now than halfway through a rollout.

Serviceable for the Long Run

Hardware outlives a purchase order. Batteries, cradles, and cables stay orderable, and repairs run through a written return process. Warranty length and spare part supply are set out in writing at the point of purchase.

Frequently Asked Questions

What can the 2D imager on the MC95 read?

The imager is a Zebra SE4710 or CM60, chosen at order time. It reads the 1D symbologies listed in the specifications above, among them UPC/EAN, Code128, Code39, Codabar, and Interleaved 2 of 5, and the 2D symbologies including PDF417, MicroPDF417, Datamatrix, QR code, Micro QR code, Aztec, and MaxiCode, plus the postal codes listed there. Read distance depends on symbol size, print quality, and ambient light, so no single figure applies. The imager is optional and the configuration without it is on this page.

Which of the two configurations should I order?

Order the configuration with the Zebra imager when the work is barcode-driven: picking, receiving, and stock counts. Order the configuration without it when the work runs on NFC card taps, forms, photos, and voice. Everything else matches across both, including the 5.5 inch 1440 x 720 display, the 5000mAh removable battery, the radios, and the software image, so one image serves a mixed fleet.

Which components are inside the MC95?

The 2D imager is a Zebra SE4710 or CM60. The operating system is Android 12 with GMS. Wireless covers IEEE802.11 a/b/g/n/ac on 2.4G and 5G with a 5G PA, Bluetooth 5.0, Vo-LTE, and GNSS across GPS/AGPS, GLONASS, BeiDou, and Galileo. NFC works at 13.56 MHz over a 2-4 cm range. Every one of these names is published by the component vendor itself, so you can check each one without going through us.

How long will an MC95 fleet stay useful?

The main battery is 5000mAh, removable, and supports quick charge, so a depleted battery is swapped on the floor rather than sent back. Storage is 64GB with a slot that accepts a Micro SD (TF) card up to 256GB, which leaves headroom as application images grow. The second slot takes either a SIM or a TF card, so a change of data plan does not force a change of hardware.

How rugged is the MC95?

The body is sealed to IP68 per IEC sealing specifications and rated for multiple 1.5 m / 4.9 ft. drops to the concrete across the operating temperature range, plus 1000 falls from 0.5 m / 1.64 ft. at room temperature. ESD is rated at plus or minus 15 KV air discharge and plus or minus 8 KV conductive discharge. Operating temperature runs from minus 20 to 50 degrees Celsius. These figures are transcribed from the manufacturer configuration sheet.

How is the MC95 serviced after purchase?

The battery, adaptor, USB cable, and charging cradle are ordered as accessories, and because the battery is removable, a swap does not need a service visit. The platform is Android 12 with GMS, so the mobile device management tooling your team already runs applies here. Repair turnaround, warranty length, and spare part supply are confirmed in writing with each order rather than promised on this page.

Match the MC95 to Your Workload

Both configurations carry Android 12 with GMS, a 5000mAh removable battery, and an IP68 sealed housing; only the Zebra imager separates them. That puts a mixed fleet on one software load, so IT certifies once. Send us your label samples, your carrier bands, and the split between scanning and non-scanning users.

Request an evaluation unit Get a configuration quote

MC95 Mobile Computer | Android 12